Close
联系我们
信息反馈
在线订购

High-transparency Fumed Rubber

Time:2011-02-26 19:20Writer:djsilicone View:2527

    High-transparency fumed rubber has high grade of transparency, excellent physical properties & yellowing resistance and good processability. They are applicable to molded products and can be used in food contact grade products with extremely requirement for high transparency, such as: nipple, bite stick , etc.

Category Product model Appearance Hardness
Shore A
Tensile strength
Mpa ≥
Elongation at break
% ≥
Breaking set
% ≤
Tear strength B
kN/m ≥
Specific density
25℃ g/cm3
Dielectric strength  kV/mm ≥ Volume resistivity
Ω.cm ≥ 
High-transparency fumed rubber NE-9430 Transparent 32±2 8.0 700 8 20 1.07±0.04 20 1.0×1015
NE-9440 40±2 9.0 600 8 35 1.13±0.04 20 1.0×1015
NE-9450 50±2 9.0 500 8 40 1.15±0.04 20 1.0×1015
NE-9460 60±2 9.0 400 8 40 1.18±0.04 20 1.0×1015
NE-9470 70±2 9.0 300 8 40 1.22±0.04 20 1.0×1015
NE-9480 80±2 8.0 200 8 20 1.25±0.04 20 1.0×1015
Addition of curing agent: liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane, silicone rubber 0.65%.
Test piece vulcanization condition: 175℃×5min, post-curing condition: 200℃×4h.  

Related material download:
Material Safety Data Sheet (MSDS)for Fumed Silicone Rubber
LFGB Test for Fumed Silicone Rubberr
FDA Test for Fumed Silicone Rubber
RoHS and Other Restricted Substances Test for Silicone Rubber
Substances of Very High Concern Test(SVHC)for Silicone Rubber
High-transparency Fumed Rubber(TDS)

------分隔线----------------------------